新闻动态
塑料模具设计要考虑的结构要素有:
塑料模具设计要考虑的结构要素有:
The structural elements to be considered in plastic mold design are:
①分型面,即模具闭合时凹模与凸模相互配合的接触表面。它的位置和形式的选定,受制品形状及外观、壁厚、成型方法、后加工工艺、模具类型与结构、脱模方法及成型机结构等因素的影响。
① parting surface, i.e. the contact surface where the concave die and the convex die fit each other when the die is closed. The selection of its position and form is affected by the shape and appearance of the product, wall thickness, forming method, post-processing technology, mold type and structure, demoulding method and forming machine structure and other factors.
②结构件,即复杂模具的滑块、斜顶、直顶块等。结构件的设计非常关键,关系到模具的寿命、加工周期、成本、产品质量等,因此设计复杂模具核心结构对设计者的综合能力要求较高,尽可能追求更简便、更耐用、更经济的设计方案。
② structural parts, i.e. slide block, inclined top, straight top block, etc. of complex mould. The design of structural parts is very important, which is related to the life, processing cycle, cost and product quality of the mold. Therefore, the design of complex mold core structure requires a higher comprehensive ability of the designer, and seeks a simpler, more durable and more economic design scheme as much as possible.
③模具精度,即避卡、精定位、导柱、定位销等。定位系统关系到制品外观质量,模具质量与寿命,根据模具结构不同,选择不钢制闸门 钢坝 保定轻钢别墅 保定平面设计培训 保定室内设计培训 保定办公家具 保定空调维修 同的定位方式,定位精度控制主要依靠加工,内模定位主要是设计者充分去考虑,设计出更加合理易调整的定位方式。
③ die accuracy, i.e. card avoidance, precise positioning, guide post, positioning pin, etc. The positioning system is related to the product appearance quality, mold quality and service life. According to the different mold structure, different positioning methods are selected. The positioning accuracy control mainly depends on the processing. The internal mold positioning is mainly considered by the designer to design a more reasonable and easy to adjust positioning method.

联系方式

  1. 名称:保定巨盛模具制造有限公司
  2. 电话:13833064090
  3. 电话:15188633222
  4. 联系人:高经理
  5. 地址:河北省保定市清苑区阎庄乡中阎庄村

版权 © 保定巨盛模具制造有限公司 网址:http://liushuicaoz.75ix.cn  推荐:流水槽模具,U型槽模具,塑料流水槽模具

网站建设及优化保定遨游网络公司